VS11: Oversize Vehicle Warning
Need Area Description
This service package uses external measurements taken by the roadside infrastructure, and transmitted to the vehicle, to support in–vehicle determination of whether an alert/warning is necessary. Specifically, the infrastructure data equipment detects and measures the approaching vehicle's height and width. The infrastructure component of the service package transmits the vehicle measurements, along with bridge, overpass, or tunnel geometry, to the oversize vehicle. The vehicle application utilizes this data to determine whether the vehicle can clear the bridge or tunnel. If deemed necessary, the driver is alerted to the impending low height and/or narrow horizontal clearance bridge or tunnel prior to a decision point, enabling the vehicle to reroute and avoid a collision. If the driver ignores the alert and continues along the route, the vehicle will generate a warning indicating an impending collision at a point near the bridge or tunnel approach. To support unequipped vehicles the infrastructure will display warning or reroute information when the measurements indicate that a vehicle does not have adequate height or width clearance. This service package can be expanded to consider weight as well as height and width.
Need Area Type: Safety
Service Package
VS11: Oversize Vehicle WarningIncludes Needs
| Number | Need |
|---|---|
| 01 | Traffic Operations needs to be able to warn potential violators of weight– or size– restricted roadways (e.g. roads or bridges, overpasses) in time for the driver to take appropriate action. |
| 02 | Traffic Operations needs to be able to determine if a vehicle exceeds the height or weight restrictions of a tunnel, bridge, overpass, or section of roadway in order to provide warning to the vehicle or driver. |
| 03 | Maintenance Operations needs to be able to provide height or weight restriction information on tunnels, bridge, overpass, or section of roadway to other centers to support their operations. |